- Occupancy Cost Percentage
- Occupancy Cost Per Square Foot
- Sales Per Square Foot
- Revenue Per Available Seat Hour
- Break-Even Sales For The Operation
- Break-Even Covers Per Service Period
- Capacity Utilization
- Average Check By Daypart
- Table Turn Rate
- Table Turn Time
- Customer Acquisition Cost
- Marketing Cost Per New Guest
- Repeat Visit Rate
- Lifetime Value Per Guest
- Return On Acquisition
- Cash Conversion Cycle
- Working Capital Requirement
- Payback Period
- Return On Investment
Every number an operator needs before committing to a lease, a location, a concept, or a capital spend runs through a formula, and most of those formulas get skipped because they arrive after the deal is already emotionally closed. This is the reference. Every calculation that matters to whether the operation should exist, where it should exist, and whether an investment pays, in one place.
Use it two ways. Run the capacity numbers — occupancy, sales per square foot, revenue per available seat hour — before you sign. Run the decision numbers — break-even for the operation, payback period, return on any spend — before you commit. Each block names the formula, the inputs, the unit, and when it earns its keep.
Occupancy Cost Percentage #
Formula: Occupancy cost % = (Total occupancy cost ÷ Total sales) × 100
Inputs: Rent, property taxes, insurance on the building, common area maintenance, total sales
Unit: Percentage
When to use: Monthly, and before signing any lease. Most operators can’t carry occupancy above roughly 10 percent of sales; the exact ceiling depends on the format.
Occupancy Cost Per Square Foot #
Formula: Occupancy cost per square foot = Total occupancy cost ÷ Total square feet
Inputs: Total occupancy cost, total square feet
Unit: Currency per square foot
When to use: When comparing locations or spaces. This is the number that tells you what the building actually costs you, independent of what you think you can sell.
Sales Per Square Foot #
Formula: Sales per square foot = Total sales ÷ Total square feet
Inputs: Total sales, total square feet
Unit: Currency per square foot
When to use: Monthly, to see how much revenue the space produces. Compare against the occupancy cost per square foot to see whether the space pays for itself.
Revenue Per Available Seat Hour #
Formula: RevPASH = Total sales ÷ (Number of seats × Number of hours open)
Inputs: Total sales, seat count, operating hours
Unit: Currency per seat-hour
When to use: The single best capacity metric for a restaurant. Tells you how much revenue each seat produces per hour it is available, which is the number that shows whether the room is earning or just sitting.
Break-Even Sales For The Operation #
Formula: Break-even sales = Total fixed costs ÷ Contribution margin ratio
Inputs: Total fixed costs (occupancy, insurance, debt service, salaried labor, base utilities), contribution margin ratio
Unit: Currency
When to use: Before signing a lease, before opening, and whenever fixed costs change. This is the sales level the operation has to hit to stop losing money.
Break-Even Covers Per Service Period #
Formula: Break-even covers = Break-even sales ÷ Average check
Inputs: Break-even sales, average check
Unit: Covers per period
When to use: When translating break-even sales into something the room can actually see. Tells you how many Guests each service period has to carry to break even.
Capacity Utilization #
Formula: Capacity utilization % = (Actual covers served ÷ Available seat-hours × Average party size) × 100
Inputs: Actual covers, available seat-hours, average party size
Unit: Percentage
When to use: Weekly, to see how much of the room’s capacity is being sold. A room running at 40 percent utilization is paying for capacity it isn’t selling.
Average Check By Daypart #
Formula: Average check = Total sales ÷ Covers, run separately for each daypart
Inputs: Daypart sales, daypart covers
Unit: Currency per cover
When to use: Weekly, to see which dayparts carry the operation and which are buying labor with revenue they don’t produce.
Table Turn Rate #
Formula: Turn rate = Covers served ÷ Number of tables
Inputs: Covers, table count
Unit: Turns per service period
When to use: Weekly, to see how often the room cycles. Low turns with high covers per table means large parties; low turns with low covers means the room isn’t drawing.
Table Turn Time #
Formula: Turn time = Total service minutes ÷ Turns
Inputs: Service period length, turn count
Unit: Minutes per turn
When to use: Weekly, to see how long the room holds each table. Rising turn time with flat sales means the experience is slowing without earning more per cover.
Customer Acquisition Cost #
Formula: CAC = Total marketing spend ÷ New Guests acquired
Inputs: Marketing spend, new Guest count
Unit: Currency per new Guest
When to use: Monthly, to see what it costs to bring a first-time Guest in. Compare against average check to see whether the acquisition pays on the first visit.
Marketing Cost Per New Guest #
Formula: Cost per new Guest = Marketing spend ÷ New Guest count
Inputs: Marketing spend, new Guest count
Unit: Currency
When to use: Same number as CAC, stated plainly. Run it monthly and after any campaign.
Repeat Visit Rate #
Formula: Repeat visit rate % = (Returning Guests ÷ Total Guests) × 100
Inputs: Returning Guest count, total Guest count
Unit: Percentage
When to use: Monthly, to see whether the operation is building a base or buying its volume one Guest at a time.
Lifetime Value Per Guest #
Formula: LTV = Average check × Visits per year × Years retained × Gross margin %
Inputs: Average check, visit frequency, retention length, gross margin
Unit: Currency per Guest
When to use: When deciding how much to spend to acquire or retain a Guest. An operation that doesn’t know its LTV is guessing at what a Guest is worth.
Return On Acquisition #
Formula: ROAS for Guests = Lifetime value ÷ Acquisition cost
Inputs: Lifetime value, acquisition cost
Unit: Ratio
When to use: When setting a marketing budget. Tells you whether the spend returns more than it costs over the life of the Guest, not just on the first visit.
Cash Conversion Cycle #
Formula: CCC = Days inventory outstanding + Days sales outstanding − Days payables outstanding
Inputs: Inventory days, receivable days, payable days
Unit: Days
When to use: Monthly, to see how long cash is tied up between paying suppliers and collecting from Guests. Restaurants usually collect fast and pay slower; a rising CCC means cash is being held hostage.
Working Capital Requirement #
Formula: Working capital = Current assets − Current liabilities
Inputs: Cash, inventory, receivables; payables, short-term debt
Unit: Currency
When to use: Monthly, and before any growth step. Tells you whether the operation can cover its near-term obligations with what it has on hand.
Payback Period #
Formula: Payback period = Cost of investment ÷ Monthly cash flow the investment produces
Inputs: Investment cost, incremental monthly cash flow
Unit: Months
When to use: Before any capital spend — equipment, buildout, a second location. Tells you how long until the investment returns its own cost.
Return On Investment #
Formula: ROI = (Gain from investment − Cost of investment) ÷ Cost of investment × 100
Inputs: Gain, cost
Unit: Percentage
When to use: Before committing money to anything — a piece of equipment, a marketing campaign, a new location. The one number that tells you whether the spend pays.